Heriks
ENBG
Contact us
← Centrifugal fans Type VCNN

Belt-Driven

Low-pressure centrifugal fans VCNN-6.3 and VCNN-8 with belt drive. For general industrial ventilation and process installations. They convey air mixtures free of mechanical impurities, explosion- and fire-safe, at temperatures up to 50 °C. Belt drive is also used when the air mixture is hotter than 50 °C, or when the required duty cannot be met by a fan with the wheel on the motor shaft.

Heriks belt-driven VCNN centrifugal fan
VCNN · belt drive

Belt-driven VCNN fan

The larger VCNN fans are built with a belt drive: the wheel sits on its own shaft and bearings in a welded steel base frame, and the motor turns it through a V-belt. This allows speeds, and so duty points, that a motor coupled directly to the wheel cannot give.

VCNN-6.3 with belt drive

Dimensional drawing of the VCNN-6.3 belt-driven fan, with outlet flange and base frame

Each curve is drawn for one wheel speed, set by the belt drive; the table gives the installed motor power needed for it. Both axes are logarithmic, as in the catalog.

Performance curves

Selected model:

Technical data

Flow and total pressure: the range covered by each curve.

The position and direction of rotation of the fan are chosen by the customer.

VCNN-8 with belt drive

Dimensional drawing of the VCNN-8 belt-driven fan, with outlet flange and base frame

Each curve is drawn for one wheel speed, set by the belt drive; the table gives the installed motor power needed for it. Both axes are logarithmic, as in the catalog.

Performance curves

Selected model:

Technical data

Flow and total pressure: the range covered by each curve.

The position and direction of rotation of the fan are chosen by the customer.

Changing the speed or the wheel diameter

With a belt drive the wheel can run at speeds other than the standard ones, and the fan parameters change by the fan laws. If you need other parameters without a belt drive, the wheel diameter can be changed instead; at constant speed the parameters change as shown on the right. Index 1 is the known duty, index 2 the new one.

Wheel speed n

FlowQ2 = Q1 · (n2n1)
Pressurep2 = p1 · (n2n1)2
PowerP2 = P1 · (n2n1)3
NoiseLP2 = LP1 + 50·log (n2n1)

Wheel diameter D

FlowQ2 = Q1 · (D2D1)3
Pressurep2 = p1 · (D2D1)2
PowerP2 = P1 · (D2D1)5
NoiseLP2 = LP1 + 70·log (D2D1)

For further information or to place an order, contact us.

Order